السيرة الذاتية

Personal Data الاسم سيفا سانكاران غوفيندا سامي الدرجة العلمية أستاذ مشارك القسم Mechanical بريد الكلية sivasankaran@qec.edu.sa البريد الشخصي sivasankarangs1979@gmail.com الجنسية الهند التحويلة 13766 رقم المكتب B1-G027 التخصص العام هندسة ميكانيكية التخصص الدقيق تكنولوجيا المواد

Academic Degrees Nr. Degree Major Institute Country Year 1 Ph.D Production Engineering National Institute of Technology, Tiruchirappalli (Government of India), Tamilnadu India 2011 2 M.Sc Manufacturing Technology National Institute of Technology, Tiruchirappalli (Government of India), Tamilnadu India 2008 3 B.Sc Mechanical Engineering Thanthai Periyar Government Institute of Technology, Vellore (University of Madras), Tamilnadu India 2001

Academic Experiences Nr. Title FT/PT Place Country Start Year Finish Year 1 Staff Member FT Department of Mechanical Engineering, College of Engineering, Qassim University, Kingdom of Saudi Arabia Saudi Arabia 2016 Till 2 Staff Member FT School of Mechanical and Electromechanical Engineering, Institute of Technology, Hawassa University Others 2014 2016 3 Staff Member FT KPR Institute of Engineering and Technology (Affiliated to ANNA University, Chennai), Coimbatore, Tamilnadu India 2011 2014 4 Staff Member FT JJ College of Engineering and Technology, Tiruchirappalli, Tamilnadu India 2007 2008 5 Staff Member FT Thanthai Roever Institute of Polytechnic College, Perambalur, Tamilnadu India 2001 2007

Administrative Work Nr. Job Name Place FT/PT Country Start Year Finish Year 1 Department M.Sc Program committee member Department of Mechanical Engineering, College of Engineering, Qassim University PT Saudi Arabia 2022 Current 2 M.Sc Industiral Engineering and Management Program committee Department of Mechanical Engineering, College of Engineering, Qassim University, Saudi Arabia PT Saudi Arabia 2021 2022 3 Scientific Research and Innovative Univt (SRIU) Committee member College of Engineering, Qassim University PT Saudi Arabia 2021 Current 4 Member in Laboratories committee College of Engineering, Qassim University PT Saudi Arabia 2021 Current 5 Materials and Production Engineering Subject Committee Head Department of Mechanical Engineering, College of Engineering, Qassim University FT Saudi Arabia 2019 Current 6 M.Sc Industrial Design Course Development Qassim University PT Saudi Arabia 2016 Current 7 Curriculum Development Committee Secretary School of Mechanical and Electromechanical Engineering, Institute of Technology, Hawassa University PT Others 2014 2016 8 Research and Development coordinator KPR Institute of Engineering and Technology, Coimbatore, Tamilnadu PT India 2012 2014 9 Management Representative for ISO 9001 : 2000 Quality Standard Programme Thanthai Roever Institute of Polytechnic College PT India 2004 2006

Non-academic Experiences Nr. Title Place FT/PT Country Start Year Finish Year 1 Entrepreneurship Development Programme Cell Coordinator KPR Institute of Engineering and Technology, Coimbatore, Tamilnadu PT India 2013 2014 2 Deputy Warden for Hostel Thanthai Roever Institute of Polytechnic College, Perambalur, Tamilnadu PT India 2004 2007

Teaching Courses Nr. Course Title Undergraduate/ Postgraduate 1 Advanced Engineering Materials Postgraduate 2 Advanced Manufacturing Processes Postgraduate 3 Selected Topics in Manufacturing Processes Postgraduate 4 Manufacturing Processes (1) Undergraduate 5 Manufacturing Processes (2) Undergraduate 6 Materials Engineering Undergraduate 7 Mechanical Drawing Undergraduate 8 Mechanical Engineering Design (1) Undergraduate 9 Mechanical Engineering Design(2) Undergraduate 10 Mechanics of Materials Undergraduate 11 Mechanics of Materials Lab Undergraduate 12 Modern Engineering materials Undergraduate 13 Statics Undergraduate 14 Tool Manufacturing Undergraduate

Community Activities Nr. Activity Targeted Country Start Finish 1 Pre University Level Guided 11th Grade school student (Mr. Basel Mohammed Alassiri) towards his research entitled on Hyperloop design for participating National Olympiad Saudi Arabia 01/09/2021 31/12/2021 2 Pre University Level Guided 11th Grade school student (Mr. Mazen Abdulaziz Almahws) towards his research on green hydrogen production for participating National Olympiad Saudi Arabia 01/01/2022 31/12/2022

Training Courses Nr. Type Category Course Title Place Country Start Finish Hours 1 Trainee_Outside_QEC Educational Participated Two Weeks Short Term Training Programme (STTP) on “Recent Advances in Modeling & Simulation of Joining of Materials” Department of Production Engineering, NIT, Trichy, sponsored by MHRD, Government of India India 29/12/2008 10/01/2009 90 2 QEC_Trainee Educational One Day Training session on Design and Production of e-courses on the LMS Blackboard Conducted by Deanship of E-Learning and Distance Education, Qassim Universi-ty. Training Credit : 4 hr Online Saudi Arabia 27/02/2022 27/02/2022 4 3 Trainer_Outside_QEC Educational ? Delivered a keynote speech of in CSIR Sponsored Two Days National Level Seminar On “Mechanics, Processing and Characterization of High Performance Hybrid Composite Materials” Department of Mechanical Engineering, KPR Institute of Engineering and Technology, Coimbatore, August 23rd and 24th 2013 India 23/08/2013 24/03/2013 4 4 Trainee_Outside_QEC Technical One Week Online Training session on Electric & Hybrid Vehicle Development Course Conducted by Society of Automotive Engineers (SAE) India, Bengaluru, India Online India 21/03/2022 26/03/2022 24 5 Trainer_Outside_QEC Educational CNC Training programme co-ordinator KPR Institute of Technology, Coimbatore India 2011 2014 120 6 Trainer_Outside_QEC Educational CNC Training programme co-ordinator Thanthai Roever Institute of Polytechnic College, Perambalur, Tamilnadu India 2003 2006 360 7 Trainer_Outside_QEC Educational Delivered a keynote speech of “(i) Processing methods of Thermoset Composites, (ii) Processing methods of Thermoplast Composites” TEQIP sponsored FDP on “Composites – Mechanics, Processing and Characterization”, PES Institute of Technology, Bangalore, India India 20/03/2013 22/03/2013 4 8 QEC_Trainee Educational One Day Training session on Use of Augumented Reality Conducted by Deanship of E-Learning and Distance Education, Qassim University. Training Credit : 4 hr Online Saudi Arabia 20/02/2022 20/02/2022 4 9 QEC_Trainee Educational NEW FACULTY MENTORING PROGRAM COLLEGE OF ENGINEERING, QASSIM UNIVERSITY Saudi Arabia 19/02/2017 23/02/2017 45 10 Trainee_Outside_QEC Educational Participated in Two Days workshops on “Micro-Machining” Department of Production Engineering on June 18th & 19th, 2008 NIT, Trichy India 18/06/2008 19/06/2008 16 11 QEC_Trainee Educational Blockboard Learning Management System Level One Qassim University Saudi Arabia 15/03/2017 16/03/2017 8 12 Trainee_Outside_QEC Technical One Month Online Training session on 3D Printing Con-ducted by MSME-Technology Development Center , Ministry of Micro, Small, and Medium Enterprices, Gov-ernment of India Society, India. Online Training India 12/04/2022 12/05/2022 96 13 Trainee_Outside_QEC Educational Participated Two Weeks Short Term Training Programme (STTP) on “Mechatronics” Shanmuga Polytechnic College, SASTRA University sponsored by AICTE & ISTE, Government of India India 11/11/2002 22/11/2002 90 14 Trainer_Outside_QEC Educational Delivered a keynote speech in a one day seminar towards “Processing of Polymeric Matrix Composite Materials” Department of Mechanical Engineering, Arulmurugan College of Engineering, Thenilay, Karur India 11/03/2016 11/03/2016 3 15 Trainer_Outside_QEC Educational Delivered a keynote speech in a one week Faculty Development Programme on “Engineering Drawing” Department of Mechanical Engineering, KPR Institute of Engineering and Technology, Coimbatore India 09/07/2012 13/07/2012 16 16 Trainee_Outside_QEC Educational Participated in Two Days workshops on “Optimization Algorithms for Manufacturing Applications” Department of Production Engineering on June 9 & 10th, 2006 sponsored by TEQIP, NIT, Trichy India 09/06/2006 10/06/2006 16 17 QEC_Trainee Educational One Day Training session on Using the Blackboard Learning Management System in Education Conducted by Deanship of E-Learning and Distance Education, Qas-sim University. Training Credit : 4 hr Online Saudi Arabia 06/02/2022 06/02/2022 4 18 Trainee_Outside_QEC Educational Participated in Two days workshops on “Computer Aided Manufacturing” Department of Production Engineering on December, 2 & 3rd, 2005 sponsored by TEQIP, NIT, Trichy India 02/12/2005 03/12/2005 16

Member in Professional Organization Nr. Title Place Country Date 1 Centre of Research, ANNA University Chennai KPR Institute of Engineering and Technology, Coimbatore India 2012 2 Powder Metallurgy Association of India (PMAI) India India 2009

Honors / Awards Nr. Title Place Country Date 1 Invited Session Chair for National conference on Trends in Automotive Parts Systems and Applications (TAPSA 2013, 2014) Sri Krishna College of Engineering and Technology, Coimbatore, Tamilnadu India 2013 2 My Two Research Articles came under Top hottest 25 articles in ScienceDirect ScienceDirect Others 2011 3 International Journal(s) Reviewer Acting Reviewer for more than 10 International Journals (Elsevier-06) Others 2010onward 4 Invited talk entitled "Additive Manufacturing Technology (AMT) - An overview and Research Trends" in Faculty Development Program on “CUTTING EDGE TECHNOLOGY AND CONTEMPORARY RESEARCH IN MECHANICAL ENGINEERING ” from 10th to 22nd June 2019 Saranathan College of Engineering, Trichy, India India 17-06-2019 5 Listed as a Wold's top 2% scientists by Elsevier BV https://elsevier.digitalcommonsdata.com/datasets/btchxktzyw Elsevier United States 01/09/2022 6 Listed as a Wold's top 2% scientists by Elsevier BV https://elsevier.digitalcommonsdata.com/datasets/btchxktzyw/3 Elsevier United States 01/08/2021

Conferences Nr. Participation Conference Name Title Place Country Fund Year 1 Conference International Conference on “Recent Advances in Manufacturing – RAM 2021 Mechanical, Degradation, and Flammable Behavior of VALOX100-x—X Wt.% Polycarbonates Composite Ma-terials for Electrical Plugs, Sockets, and Extension Applications. S.V.National Institute of Technology, Surat, India India Others 2020 2 Conference International Conference on Powder Metallurgy 2010 (PM10) Effect of grain refinement on workability of Al 6061 alloy reinforced with 10 wt.% TiO2 composite Powder Metallurgy Association of India (PMAI) India Others 2010 3 Conference International Conference on Powder Metallurgy 2009 (PM09) Influence of carbon content on workability behavior of powder metallurgy steels Powder Metallurgy Association of India (PMAI) India Others 2009 4 Conference National Conference of Emerging Materials and Technologies for India 2020 (EMT-INDIA 2020) Study on milling of glass fiber reinforced plastics (GFRP) composite National Institute of Technology, Tiruchirappalli India No 2008 5 Conference International Conference on Advances in Manufacturing Technology (ICAMT 2008) for Young Engineers Study on milling of glass fiber reinforced plastics (GFRP) composites Indian Institute of Technology Madras, Chennai India No 2008 6 Conference National Conference of Emerging Trends in Mechanical Engineering and Sciences (ETIMES-2007) Study of Milling of GFRP composite using statistical analysis (ANOVA) Bannary Amman Institute of Technology, Erode India No 2007

Publications Nr. Authors Publication Title Place & Date Journal Ranking Impact Factor Status 1 Hany R. Ammar,Elsayed M. Sherif,S.Sivasankaran Developing Improved Corrosion-Resistant AA5083—BN/WC Composites for Tribological Applications Materials ,Vol.15 ,Issue2,ppt 1663 2023 Q3 3.748 Applied Fund(QU) 2 S.Sivasankaran,Hany R. Ammar,El-Sayed M. Sherif Influence of Oxide Dispersions (Al2O3, TiO2, and Y2O3) in CrFeCuMnNi High-Entropy Alloy on Microstructural Changes and Corrosion Resistance Crystals ,Vol.13 ,Issue4,ppt 605 2023 Q2 2.67 Applied Fund(QU) 3 S.Sivasankaran,Hany R Ammar,El-Sayed M. Sherif Effect of Al2O3 (x = 0, 1, 2, and 3 vol.%) in CrFeCuMnNi-x High-Entropy Alloy Matrix Composites on their Microstructure and Mechanical andWear Performance Materials ,Vol.16 ,Issue0,ppt 3672 2023 Q3 3.748 Applied Fund(QU) 4 BANDAR ALMANGOUR, S. SIVASANKARAN,HANY R. AMMAR Synthesis, Microstructures, Mechanical, and Corrosion Behavior of FeMn(35x)–x (Cu, W, and Co)-Based Biodegradable Alloys Prepared by Mechanical Alloying and Selective Laser Melting METALLURGICAL AND MATERIALS TRANSACTIONS A ,Vol.0 ,Issue0,ppt 14 2023 Q1 2.8 Applied Fund(No) 5 K. Kaviyarasan,R. Soundararajan,S. Sivasankaran Metallurgical enhancement and mechanical performance of GTAW of AA5083 plates using medium and high-entropy fillers Materials Characterization ,Vol.204 ,Issue0,ppt 113167 2023 Q1 4.7 Applied Fund(No) 6 Ammar Mustafa Al?Areqi,Bandar Aloyaydi,Subbarayan Sivasankaran Development of 3D Printed Biodegradable Poly?lactic Acid/ Polyurethane Foams/Milled Glass Fibers of Sustainable Composites with Application on Helmet Fibers and Polymers ,Vol.24 ,Issue0,ppt 2065–2082 2023 Q2 2.5 Applied Fund(No) 7 Hany R. Ammar,Subbarayan Sivasankaran,El-Sayed M. Sherif Synthesis, Microstructure Investigation, Mechanical and Tribological Behaviour of the AA5083–WC Composite Materials ,Vol.16 ,Issue0,ppt 2891 2023 Q2 3.4 Applied Fund(QU) 8 A. Sathishkumar,R. Soundararajan,S. Sivasankaran Influence of eutectic?Si in as?cast and fibrous?eutectic?Si in LPBF?processed AlSi10Mg alloys on wear and corrosion behaviors treated with direct aging route Journal of Materials Science ,Vol.-- ,Issue--,ppt 24 2023 Q1 4.5 Applied Fund(No) 9 S.Sivasankaran,Hany R. Ammar,Bandar Almangour Influence of Milling Time and Ball-to-Powder Ratio on Mechanical Behavior of FeMn30Cu5 Biodegradable Alloys Prepared by Mechanical Alloying and Hot-Forging Crystals ,Vol.12 ,Issue12,ppt 1777 2022 Q2 2.67 Applied Fund(QU) 10 K Showkat Ali,R Karunanithi, M Prashanth Structure and mechanical properties of in-situ synthesized ?-Ti/TiO2/TiC hybrid composites through mechanical milling and spark plasma sintering Ceramics International ,Vol.48 ,Issue8,ppt 14 2022 Q1 4.527 Applied Fund(No) 11 A. Sathishkumar,R. Soundararajan,S.Sivasankaran Effect of Direct Aging on the microstructure and Mechanical Behavior of AlSi10Mg Alloy: Casting Versus Selective Laser Melting Journal of Materials Engineering and Performance ,Vol.32 ,Issue0,ppt 3215–32 2022 Q3 2.036 Applied Fund(No) 12 L. Feroz Ali,R. Soundararajan,S. Sivasankaran Tungsten Nanoparticle Reinforced AA7055 via Friction Stir Process Route with Multi-groove Strategy Journal of Materials Engineering and Performance ,Vol.32 ,Issue0,ppt 3025–30 2022 Q3 2.036 Applied Fund(No) 13 M. Prashanth,R. Karunanithi,S. Sivasankaran Grain refinement and mechanical properties enhancement on inclusion of Al2O3 in AA 7017 alloy synthesized by mechanical alloying (MA) and hot pressing (HP) Materials Today Communications ,Vol.10473 ,Issue0,ppt 104735 2022 Q3 3.662 Applied Fund(No) 14 S.Sivasankaran,Osama M Irfan,K.R.Ramkumar Manufacturing of (Al–10Zn) / TiB2 in-situ nanocomposites by reactive liquid metallurgy and hot-extrusion for enhanced interfacial bonding and mechanical properties Materials Science and Engineering A ,Vol.859 ,Issue0,ppt 144200 2022 Q1 6.044 Applied Fund(No) 15 Prashanth M,Karunanithi R,S. Rasool Mohideen A comparative study on X-ray peak broadening analysis of mechanically alloyed Al2O3 particles dispersion strengthened Al 7017 alloy MATERIALS CHEMISTRY AND PHYSICS ,Vol.294 ,Issue0,ppt 127015 2022 Q2 4.778 Applied Fund(No) 16 K.R.Ramkumar,Jyoti Menghani,Vinay Kumar Jha Investigations on work hardening behaviour and relative slip distance in GTA welded AA 6063 plates using AA 5356-TiB 2 filler rod Materials Characterization ,Vol.194 ,Issue0,ppt 112379 2022 Q1 4.537 Applied Fund(No) 17 Phalalochanan Nair Jayapal Arjun,Bipin Sankar,Karthik V Shankar Silver and Silver Nanoparticles for the Potential Treatment of COVID-19: A Review Coatings ,Vol.12 ,Issue11,ppt 1679 2022 Q2 3.236 Applied Fund(No) 18 M. Prashanth,R. Karunanithi,S.R. Mohideen Effect of Al2O3/Y2O3 in AA 7017 matrix nanocomposites on phase formation, microstructures and mechanical behavior synthesized by mechanical alloying and hot-pressing techniques Applied Physics A ,Vol.128 ,Issue85,ppt 12 2022 Q2 3.5 Applied Fund(No) 19 R. Soundararajan, A. Sathishkumar,S. Sivasankaran Evaluation of Microstructures, Mechanical and Dry-Sliding Wear Performance of A356-(Fly Ash/SiCp) Hybrid Composites International Journal of Metalcasting ,Vol.00 ,Issue00,ppt 13 2022 Q2 1.88 Applied Fund(No) 20 K. Algadah,S. Sivasankaran,A.S. Alaboodi Mechanical, Degradation, and Flammable Behavior of VALOX 100-x—X Wt.\% Polycarbonates Composite Materials for Electrical Plugs, Sockets, and Extension Applications Harshit K. Dave · Uday Shanker Dixit · Dumitru Nedelcu Editors Recent Advances in Manufacturing Processes and Systems ,Vol.00 ,Issue00,ppt 8 2022 Q3 0.2 Applied Fund(Others) 21 A. Mustafa,B. Aloyaydi,S. Sivasankaran Shore Hardness Characterization of FDM Printed PLA/Epoxy/MGFs Composite Material Structure Recent Advances in Manufacturing Processes and Systems ,Vol.00 ,Issue00,ppt 7 2022 Q3 0.5 Applied Fund(No) 22 R. Soundararajan,K.R. Ramkumar,S. Sivasankaran Enhancement of tensile strength in AA 6061-T6 plates joined by gas tungsten arc welding using high entropy alloy filler sheet Materials Science and Engineering: A ,Vol.832 ,Issue00,ppt 14 2022 Q1 5.234 Applied Fund(No) 23 K.R. Ramkumar, N. Radhika,S. Sivasankaran Evolution of microstructure and mechanical properties of [Cu–10Ni]–Si3N4 nanocomposites developed using mechanical alloying and spark plasma sintering Journal of Alloys and Compounds ,Vol.899 ,Issue00,ppt 15 2022 Q1 5.316 Applied Fund(No) 24 D.R. Kumar,N. Jeyaprakash,C.-H. Yang Optimization of drilling process on carbon-fiber reinforced plastics using genetic algorithm Surface Review and Letters ,Vol.28 ,Issue3,ppt 11 2021 Q3 0.863 Applied Fund(No) 25 A. Palanisamy,N. Jeyaprakash,V. Sivabharathi Influence of heat treatment on the mechanical and tribological properties of Incoloy 800H Superalloy Archives of Civil and Mechanical Engineering ,Vol.21 ,Issue00,ppt 13 2021 Q1 4.369 Applied Fund(No) 26 H.R. Ammar,S. Sivasankaran,A.S. Alaboodi Investigation of the Microstructure and Compressibility of Biodegradable Fe-Mn-Cu/W/Co Nanostructured Alloy Powders Synthesized by Mechanical Alloying Materials ,Vol.14 ,Issue11,ppt 18 2021 Q2 3.623 Applied Fund(QU) 27 L.F. Ali, N. Kuppuswamy,R. Soundararajan Microstructural and Wear Behaviour of Al 6063--W Nanocomposites Developed Using Friction Stir Processing Metals and Materials International ,Vol.27 ,Issue00,ppt 11 2021 Q1 3.642 Applied Fund(No) 28 H.R. Ammar, S. Sivasankaran,A.S. Alaboodi Synthesis, phase evolutions, microstructures, and compaction behavior of four copper-chalcogenide micron-thermoelectric powders (Cu2ZnSnS4/Se4, Cu2MnSiS4/Se4, Cu2MnSnS4/Se4, and Cu2ZnSiS4/Se4) prepared by mechanical alloying Materials Chemistry and Physics ,Vol.271 ,Issue1,ppt 14 2021 Q2 4.094 Applied Fund(QU) 29 P. Angappan, N. Jeyaprakash, V. Sivabharathi Effects of dry turning parameters of Incoloy 800H superalloy using Taguchi-based Grey relational analysis and modeling by response surface methodology Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science ,Vol.236 ,Issue1,ppt 12 2021 Q3 1.762 Applied Fund(No) 30 A. Mustafai,B. Aloyaydi,S. Subbarayan Mechanical properties enhancement in composite material structures of poly-lactic acid/epoxy/milled glass fibers prepared by fused filament fabrication and solution casting Polymer Composites ,Vol.42 ,Issue12,ppt 13 2021 Q2 3.171 Applied Fund(No) 31 S. Sivasankaran,F.A. Al-Mufadi, H.R. Ammar Influence of V and Zn in FeCrCuMnTi High-Entropy Alloys on Microstructures and Uniaxial Compaction Behavior Prepared by Mechanical Alloying Crystals ,Vol.11 ,Issue11,ppt 20 2021 Q2 2.589 Applied Fund(QU) 32 S. Sivasankaran,H.R. Ammar,F.A. Al-Mufadi Continuous hot-compaction behavior of nanostructured FeCrCuMnTi-(V, Zn) high-entropy alloys Materials and Manufacturing Processes ,Vol.37 ,Issue10,ppt 12 2021 Q2 4.616 Applied Fund(QU) 33 H.R. Ammar, S. Sivasankaran,A.S. Alaboodi The influence of ball milling processing variables on the microstructure and compaction behavior of Fe--Mn--Cu alloys Materials Science ,Vol.39 ,Issue3,ppt 17 2021 Q3 0.911 Applied Fund(QU) 34 S. Sivasankaran, K.R. Ramkumar,H.R. Ammar Microstructural evolutions and enhanced mechanical performance of novel Al-Zn die-casting alloys processed by squeezing and hot extrusion Elsevier Journal of Materials Processing Technology ,Vol.292 ,Issue00,ppt 14 2021 Q1 5.551 Applied Fund(QU) 35 L.F. Ali,N. Kuppuswamy,R. Soundararajan Microstructural evolutions and mechanical properties enhancement of AA 6063 alloy reinforced with Tungsten (W) nanoparticles processed by friction stir processing. Materials Characterization ,Vol.172 ,Issue00,ppt 12 2021 Q1 4.342 Applied Fund(QU) 36 S. Sivasankaran,K.R. Ramkumar,H.R. Ammar Microstructural Evolutions, Hot Deformation and Work Hardening Behaviour of Novel Al–Zn Binary Alloys Processed by Squeezing and Hot Extrusion Metals and Materials International ,Vol.28 ,Issue00,ppt 13 2021 Q1 3.642 Applied Fund(QU) 37 H.R. Ammar,S. Sivasankaran,A.S. Alaboodi Synthesis, microstructural investigation and compaction behavior of Al0.3CrFeNiCo0.3Si0.4 nanocrystalline high entropy alloy Advanced Powder Technology ,Vol.32 ,Issue2,ppt 14 2021 Q1 4.833 Applied Fund(QU) 38 M. Prashanth,R. Karunanithi,S. RasoolMohideen A comprehensive exploration on the development of nano Y2O3 dispersed in AA 7017 by mechanical alloying and hot-pressing technique Ceramics International ,Vol.47 ,Issue16,ppt 12 2021 Q1 4.527 Applied Fund(No) 39 M. Prashanth,R. Karunanithi,S. Rasool Mohideen An exploration on microstructural observation and mechanical behavior of nanocrystallite Al 7017 alloy via mechanical alloying and uniaxial hot pressing Materials Characterization ,Vol.171 ,Issue--,ppt 110803 2021 Q1 3.562 Applied Fund(No) 40 Yaser A. Alshataif,S. Sivasankaran,Fahad A. Al?Mufadi Synthesis, Microstructures and Mechanical Behaviour of Cr0.21Fe0.20Al0.41Cu0.18 and Cr0.14Fe0.13Al0.26Cu0.11Si0.25Zn0.11 Nanocrystallite Entropy Alloys Prepared by Mechanical Alloying and Hot?Pressing Metals and Materials International ,Vol.-- ,Issue--,ppt -- 2020 Q2 1.992 Applied Fund(No) 41 N. Jeyaprakash,Che-Hua Yang ,S. Sivasankaran Formation of FeCrMoVC Layers on AA6061 by Laser Cladding Process: Microstructure and Wear Characteristics Trans Indian Inst Met ,Vol.73 ,Issue--,ppt 1611–1617 2020 Q3 1.205 Applied Fund(No) 42 R. Soundararajan,S. Sivasankaran, N. Babu Appraisal of tribological properties of A356 with 20% SiC composites under dry sliding condition Journal of the Brazilian Society of Mechanical Sciences and Engineering ,Vol.42 ,Issue--,ppt 147 2020 Q3 1.755 Applied Fund(No) 43 S.Sivasankaran,Fahad Al-Mufadi, Influence of Strain Rate and Percentage of Cold Work on Room-Temperature Deformation Behaviour of AISI 1015 Carbon Steel: Detailed Microstructures and Cold Workability Map Investigations Transactions of the Indian Institute of Metals ,Vol.74 ,Issue--,ppt 1439–1448 2020 Q3 1.205 Applied Fund(No) 44 Bandar Abdullah Aloyaydi,S. Sivasankaran, Low-Velocity Impact Characteristics of 3D-Printed Poly-Lactic Acid Thermoplastic Processed by Fused Deposition Modeling Transactions of the Indian Institute of Metals ,Vol.73 ,Issue--,ppt 1669–1677 2020 Q3 1.205 Applied Fund(No) 45 Bandar Aloyaydi,S. Sivasankaran,Ammar Mustafa Investigation of infill-patterns on mechanical response of 3D printed poly-lactic-acid Polymer Testing ,Vol.87 ,Issue--,ppt 106557 2020 Q1 3.275 Applied Fund(No) 46 Yaser A. Alshataif,S. Sivasankaran,Fahad A. Al?Mufadi Synthesis, structure, and mechanical response of Cr0.26Fe0.24Al0.5 and Cr0.15Fe0.14Al0.30Cu0.13Si0.28 nanocrystallite entropy alloys Advanced Powder Technology ,Vol.31 ,Issue5,ppt 2161-2177 2020 Q1 4.217 Applied Fund(No) 47 N. Jeyaprakash,Che?Hua Yang,Muthukannan Duraiselvam Comparative study of laser melting and pre?placed Ni–20% Cr alloying over nodular iron surface Archives of Civil and Mechanical Engineering ,Vol.20 ,Issue--,ppt -- 2020 Q1 3.672 Applied Fund(No) 48 S.Sivasankaran,Hany R. Ammar,Abdulaziz S. Alaboodi Mathematical Modeling (Buckingham's ? Theorem) and Optimization Technique on Mechanically Alloyed Nanocomposite Materials International Journal of Engineering and Advanced Technology ,Vol.9 ,Issue4,ppt 1915-1921 2020 Q3 0 Applied Fund(QU) 49 Abdulaziz S. Alaboodi,S. Sivasankaran,Hany R. Ammar Non-Traditional Machining Process of Composite Materials using Renewable Lubricants International Journal of Recent Technology and Engineering ,Vol.9 ,Issue1,ppt 929-933 2020 Q3 0 Applied Fund(QU) 50 Hany R. Ammar,S. Sivasankaran,Abdulaziz S. Alaboodi Synthesis and Microstructural Characterization of Cu2MnSnS4/Se4 Nano-Thermoelectric Material International Journal of Recent Technology and Engineering ,Vol.8 ,Issue6,ppt 3749-3755 2020 Q3 0 Applied Fund(QU) 51 Yaser A. Alshataif,Fahad Al-Mufadi,Osama M. Irfan Synthesizing and Hot Deformation Behavior of Novel Al-X Wt.% Zn Alloys for Advanced Casting Industries International Journal of Recent Technology and Engineering ,Vol.8 ,Issue6,ppt 3981-3986 2020 Q3 0 Applied Fund(QU) 52 R.Soundararajan,A. Ramesh,K. Ponappa Optimization of WEDM process parameters by RSM in machining of stir cum squeeze cast A413-B 4 C composites SN Applied Sciences ,Vol.2 ,Issue--,ppt 1768 2020 NotRanked 0 Applied Fund(No) 53 D.Rajkumar,N. Jeyaprakash,Che-Hua Yang Optimization of Drilling Process on Carbon-Fibre reinforced Plastics using Genetic Algorithm. Surface Review Letters Surface Review and Letters ,Vol.-- ,Issue--,ppt -- 2020 Q3 0 Applied Fund(No) 54 K.R.Ramkumar,S.Sivasankaran,Fahad A Almufadi Investigations on microstructure, mechanical, and tribological behaviour of AA 7075–x wt.% TiC composites for aerospace applications Archives of Civil and Mechanical Engineering ,Vol.19 ,Issue2,ppt 428-438 2019 2.763 Applied Fund(QU) 55 N.Jeyaprakash,S.Sivasankaran,G.Prabhu Enhancing the tribological properties of nodular cast iron using multi wall carbon nano-tubes (MWCNTs) as lubricant additives Materials Research Express ,Vol.6 ,Issue-,ppt 1-12 2019 1.15 Applied Fund(Others) 56 R.Clinkton,V.Senthil,K.R.Ramkumar Effect of boron carbide nano particles in CuSi4Zn14 silicone bronze nanocomposites on matrix powder surface morphology and structural evolution via mechanical alloying Ceramics International ,Vol.45 ,Issue3,ppt 3492-3501 2019 3.057 Applied Fund(QU) 57 Sivasankaran Subbarayan,, Optimization on dry sliding wear behavior of yellow brass using face centered composite design AIMS Materials Science ,Vol.6 ,Issue1,ppt 80-96 2019 1.14 Applied Fund(No) 58 R.Clinkton,V.Senthil,K.R.Ramkumar Influence of B4C nanoparticles on mechanical behaviour of Silicon brass nanocomposite through mechanical alloying and hot pressing Ceramic International ,Vol.45 ,Issue15,ppt 18691-18700 2019 3.45 Applied Fund(No) 59 R.Soundararajan,S.Sivasankaran,Fahad A. Al-Mufadi Investigation on A356-20wt.%SiC composites through mechanical stirring and ultra-sonic-assisted cavitation Materials Research Express ,Vol.6 ,Issue-,ppt 096572 2019 1.5 Applied Fund(No) 60 N.Jeyaprakash,Che-Hua Yang,S.Sivasankaran Laser cladding process of Cobalt and Nickel based hard-micron-layers on 316L-stainless-steel- substrate Materials and Manufacturing Processes ,Vol.-- ,Issue--,ppt 11 2019 3.45 Applied Fund(No) 61 Bandar Abdullah Aloyaydi,Sivasankaran Subbarayan,Hany Ammar Influence of infill density on microstructure and flexural behavior of 3D printed PLA thermoplastic parts processed by fusion deposition modeling AIMS Materials Science ,Vol.6 ,Issue6,ppt 1033–1048 2019 1.14 Applied Fund(No) 62 Abdulaziz S. Alaboodi,S. Sivasankaran, Experimental design and investigation on the mechanical behavior of novel 3D printed biocompatibility polycarbonate scaffolds for medical applications Journal of Manufacturing Processes ,Vol.35 ,Issue2,ppt 479-491 2018 3.35 Applied Fund(No) 63 A.Palanisamy,T.Selvaraj,S.Sivasankaran Heat-treatment effect on CNC turning of INCOLOY 800H superalloy Materials and Manufacturing Processes ,Vol.-- ,Issue--,ppt 1-8 2018 2.274 Applied Fund(No) 64 Zahid Hussain,Fahad A. Al-Mufadi,S.Sivasankaran Microstructure and mechanical properties investigation on nanostructured Nickel 200 alloy using multi-axial forging Materials Science & Engineering A (Elsevier) ,Vol.712 ,Issue--,ppt 772–779 2018 4 Applied Fund(QU) 65 S.Sivasankaran,Abdulaziz S. Alaboodi,Fahad Al-Mufadi Cold deformation of dezincification resistant yellow brass for plumbing applications MATERIALS AND MANUFACTURING PROCESSES (Taylor and Francis) ,Vol.-- ,Issue--,ppt 1-8 2018 3.5 Applied Fund(QU) 66 A.Palanisamy,T.Selvaraj,S.Sivasankaran Optimization of Turning Parameters of Machining Incoloy 800H Superalloy Using Cryogenically Treated Multilayer CVD-Coated Tool Arabian Journal for Science and Engineering (Springer) ,Vol.-- ,Issue--,ppt 1-14 2018 1.6 Applied Fund(No) 67 S.Sivasankaran,, Influence of strain rate and percent cold work on the hardness examination of commercial yellow brass International Conference on Innovations in Science and Technology in Civil Engineering (MRITCISTICE 2018) at Malla Reddy Institute of Technology, Hyderabad, India ,Vol.-- ,Issue--,ppt 1-3 2018 0 Applied Fund(No) 68 R.Soundararajan,P.M.Sendil,P.Saravanakumar Effect of die sleeve material on mechanical behavior of A413 aluminium alloy processed through squeeze casting route nternational Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ,Vol.8 ,Issue3,ppt 583-590 2018 3.2 Applied Fund(No) 69 S.Sivasankaran,, Influence of TiC addition on the surface roughness during turning of AA 7075 alloy processed through stir-casting AIMS Materials Science ,Vol.5 ,Issue4,ppt 699-710 2018 1.14 Applied Fund(QU) 70 A.Palanisamy,T.Selvaraj,S.Sivasankaran EXPERIMENTAL INVESTIGATION AND MULTI-RESPONSE OPTIMIZATION IN TURNING OF INCOLOY 800 H SUPERALLOY Archives of Metallurgy and Materials ,Vol.63 ,Issue4,ppt 1683-1691 2018 1 Applied Fund(QU) 71 Abdulaziz S Alaboodi,S.Sivasankaran, Experimental design and investigation on the mechanical behavior of novel 3D printed biocompatibility polycarbonate scaffolds for medical applications Journal of Manufacturing Processes ,Vol.35 ,Issue0,ppt 479-491 2018 2.809 Applied Fund(QU) 72 S.Sivasankaran,, Optimisation and analysis of dry sliding wear behaviour of stir casted AlSi6Cu4-TiO 2 composite using central composite design Surface Review and letters ,Vol.- ,Issue-,ppt - 2018 1.2 Applied Fund(QU) 73 S.Sivasankaran,K.R.Ramikumar,Abdulaziz S. Alaboodi Strengthening Mechanisms on (Cu–10Zn)100?x–x wt% Al2O3 (x = 0, 3, 6, 9 and 12) Nanocomposites Prepared by Mechanical Alloying and Vacuum Hot Pressing: Influence of Reinforcement Content Transactions of the Indian Institute of Metals (Springer) ,Vol.70 ,Issue3,ppt 791–800 2017 1.3 Applied Fund(No) 74 R.Soundararajan,A.Ramesh,S.Sivasankaran Modeling and Analysis of Mechanical Properties of Aluminium Alloy (A413) Reinforced with Boron Carbide (B4C) Processed Through Squeeze Casting Process Using Artificial Neural Network Model and Statistical Technique Materials Today: Proceedings ,Vol.4 ,Issue2,ppt 2008-2030 2017 0 Applied Fund(No) 75 A.Palanisamy,T.Selvaraj,S.Sivasankaran Taguchi-based grey relational analysis for modeling and optimizing machining parameters through dry turning of Incoloy 800H Journal of Mechanical Science and Technology (Springer) ,Vol.31 ,Issue9,ppt 4159–4165 2017 1.128 Applied Fund(No) 76 S.Sivasankaran,, ALUMINIUM ALLOYS RECENT TRENDS IN PROCESSING, CHARACTERIZATION, MECHANICAL BEHAVIOR AND APPLICATIONS (Book) Intech Publisher ,Vol.- ,Issue-,ppt - 2017 0 Applied Fund(No) 77 S.Sivasankaran,Abdulaziz S. Alaboodi , Structural Characterization and Mechanical Behavior of Al 6061 Nanostructured Matrix Reinforced with TiO2 Nanoparticles for Automotive Applications Functionalized Nanomaterials, ISBN 978-953-51-2856-4, Print ISBN 978-953-51-2855-7, 172 pages, Publisher: InTech, Chapters published ,Vol.01 ,Issue01,ppt 1-35 2016 0.7 Applied Fund(QU) 78 K.R. Ramkumar,S. Ilangovan,S. Sivasankaran Experimental investigation on synthesis and structural characterization of Cu-Zn-x wt%Al2O3 (x = 0, 3, 6, 9 & 12%) nanocomposites powders through mechanical alloying Journal of Alloys and Compounds ,Vol.688 ,Issue--,ppt 518-526 2016 3.014 Applied Fund(Others) 79 D.Palanisamy,G.Ramesh,S.Sivasankaran Optimizing the Supercharger Effect on the Performance and Emission of Biogas Diesel Engine using ANFIS Asian Journal of Research in Social Sciences and Humanities ,Vol.6 ,Issue7,ppt 1364-1375 2016 0 Applied Fund(No) 80 D.Palanisamy,G.Ramesh,S. Sivasankaran CFD ANALYSIS FOR HOMOGENOUS EFFECT OF BIOGAS AND AIR IN THE INTAKE MANIFOLD OF DUAL FUEL CI ENGINE International Journal of Advanced Engineering Technology ,Vol.7 ,Issue2,ppt 265-268 2016 0 Applied Fund(No) 81 T.Prakash,P.Sasikumar,S.Sivasankaran The Influences of the Friction Stir Processing On the Microstructure and Hardness of Al7075 Aluminium Sheet Metal Reinforced with SiC / 3 % B4C Hybrid Surface Nanocomposite ADVANCES in NATURAL and APPLIED SCIENCES ,Vol.10 ,Issue6,ppt 21-25 2016 0 Applied Fund(No) 82 Duraisamy Palaniswamy,Gurusamy Ramesh,Subbarayan Sivasankaran Optimising biogas from food waste using a neural network model Municipal Engineer, ICE Publishing, England ,Vol.-- ,Issue--,ppt -- 2016 0.275 Applied Fund(No) 83 S.Jeyaraj,K.P.Arulshri,S.Sivasankaran Investigations on effect of process parameters of electrodeposited Ni - Al2O3 composite coating using orthogonal array approach and mathematical modeling International Journal of Archives of Civil and Mechanical Engineering (Elsevier) ,Vol.16 ,Issue1,ppt 168-177 2016 2.194 Applied Fund(No) 84 R.Soundararajan,A.Ramesh,P.Saravanakumar Effect of Squeeze casting parameters on surface roughness of A413 alloy and A413-B4C composites using full factorial design International Conference on Technological Advancements in Materials and Manufacturing for Industrial Environment (TAMMIE 16) ,Vol.-- ,Issue--,ppt 163 2016 0 Applied Fund(No) 85 T. Prakash,P. Sasikumar,S.Sivasankaran Experimental Investigation of Friction Stir Processed Al7075 aluminium plate reinforced with Al2O3/1%Gr hybrid surface nanocomposite Technological Advancements in Materials and Manufacturing for Industrial Environment (TAMME 16) ,Vol.-- ,Issue--,ppt 95 2016 0 Applied Fund(No) 86 T. Prakash,P. Sasikumar,S.Sivasankaran Experimental Investigation of Friction Stir Processed Al7075 Aluminium Plate Reinforced with Al2O3 / 1 % Gr Hybrid Surface Nanocomposite Asian Journal of Research in Social Sciences and Humanities ,Vol.6 ,Issue7,ppt 892-901 2016 4.557 Applied Fund(No) 87 K.R.Ramkumar,Habtamu Bekele,S.Sivasankaran Experimental Investigation on Mechanical and Turning Behavior of Al 7075/x%wt. TiB2-1% Gr In Situ Hybrid Composite Advances in Materials Science and Engineering ,Vol.2015 ,Issue1,ppt 1-14 2015 1.01 Applied Fund(No) 88 R.Soundararajan,A.Ramesh,S.Sivasankaran Modeling and analysis of mechanical properties of aluminium alloy (A413) processed through squeeze casting route using artificial neural network model and statistical technique Advances in Materials Science and Engineering ,Vol.2015 ,Issue1,ppt 1-17 2015 1.7 Applied Fund(No) 89 D. Jeyasimman,K. Sivaprasad,S.Sivasankaran Microstructural observation, consolidation and mechanical behaviour of AA 6061 nanocomposites reinforced by ?-Al2O3 nanoparticles Advanced Powder Technology (Elsevier) ,Vol.26 ,Issue1,ppt 139-148 2015 2.478 Applied Fund(Others) 90 S.Sivasankaran,K. Sivaprasad,R. Narayanasamy Effect of coarse grain matrix content on the mechanical behavior of trimodaled AA 6061-TiO2 nanocomposite prepared by mechanical alloying International Journal of Advanced Manufacturing Technology (Springer) ,Vol.78 ,Issue--,ppt 385-394 2015 1.568 Applied Fund(Others) 91 S.Sivasankaran,P.T. Harisagar,E. Saminathan Effect of Nose Radius and Graphite Addition on Turning of AA 7075-ZrB2 in-situ Composites Procedia Engineering (Elsevier) ,Vol.97 ,Issue--,ppt 582-589 2014 0 Applied Fund(No) 92 S.Sivasankaran,P.T. Harisagar,E. Saminathan Effect of process parameters in surface roughness during turning of GFRP pipes using PCD insert tool Procedia Engineering (Elsevier) ,Vol.97 ,Issue--,ppt 64-71 2014 0 Applied Fund(No) 93 A. Saravanakumar,P. Sasikumar,S.Sivasankaran Synthesis and Mechanical Behavior of AA 6063-x wt. % Al2O3-1% Gr (x = 3, 6, 9 and 12 wt. %) Hybrid Composites Procedia Engineering (Elsevier) ,Vol.97 ,Issue--,ppt 951-960 2014 0 Applied Fund(No) 94 A. Saravanakumar,P. Sasikumar,S.Sivasankaran Effect of Graphite Particles in Drilling of Hybrid Aluminum Matrix Composite Procedia Engineering (Elsevier) ,Vol.97 ,Issue--,ppt 495-504 2014 0 Applied Fund(No) 95 A.R.Danavignesh,S.Siddarda,S.Karthickeyan Performance Testing of Diesel Engine with TiO2 coated Engine Parts International Journal of Innovative Research in Science, Engineering and Technology ,Vol.3 ,Issue2,ppt 1-5 2014 0 Applied Fund(No) 96 S.Sasikumar,K.R.Ramkumar,S.Iniyan Study of Mechanical and Machining behavior of AA 7075-3% TiB2 in-situ composite International Journal of Innovative Research in Science, Engineering and Technology ,Vol.3 ,Issue3,ppt 1229-2235 2014 0 Applied Fund(No) 97 V.Santhosh Cibi,K.Gokulraj,P.Kathiravan Convective heat transfer enhancement of graphite nanofluids in shell and tube heat exchanger International Journal of Innovative Research in Science, Engineering and Technology ,Vol.3 ,Issue2,ppt 270-276 2014 0 Applied Fund(No) 98 D. Jeyasimman,S.Sivasankaran,K. Sivaprasad An investigation of the synthesis, consolidation and mechanical behaviour of Al 6061 nanocomposites reinforced by TiC via mechanical alloying Materials & Design (Elsevier) ,Vol.57 ,Issue--,ppt 394-404 2014 4.023 Applied Fund(Others) 99 D. Jeyasimman,K. Sivaprasad,S.Sivasankaran Fabrication and consolidation behavior of Al 6061 nanocomposite powders reinforced by multi-walled carbon nanotubes Powder Technology (Elsevier) ,Vol.258 ,Issue--,ppt 189-197 2014 3.3 Applied Fund(Others) 100 T. Prakash,P. Sasikumar,S. Sivasankaran Investigations on the microstructure and mechanical property of friction stir processed AA6061 aluminium sheet metal reinforced with Al2O3 surface composite International Journal of Materials Engineering Innovation ,Vol.5 ,Issue3,ppt 192-204 2014 0 Applied Fund(No) 101 A.Palanisamy,R.Rekha,S.Sivasankaran Multi-Objective Optimization of EDM Parameters Using Grey Relational Analysis for Titanium Alloy (Ti-6Al-4V) Applied Mechanics and Materials, Trans Tech Publications ,Vol.592-5 ,Issue--,ppt 540-544 2014 0 Applied Fund(No) 102 S.Sivasankaran,E.Saminathan,S.Sidharth Effect of Graphite addition on surface roughness during turning of AA 7075-ZrB2 in-situ metal matrix composites Procedia Materials Science (Elsevier) ,Vol.5 ,Issue--,ppt 2122-2131 2014 0 Applied Fund(Others) 103 T. Prakash,S.Sivasankaran,P.Sasikumar Mechanical and Tribological Behaviour of Friction Stir Processed Al6061 Aluminium Sheet Metal Reinforced with Al2O3/0.5 Gr Hybrid Surface Nanocomposite Arabian Journal for Science and Engineering ,Vol.40 ,Issue2,ppt 559-569 2014 0.728 Applied Fund(No) 104 S.Iniyan,S.Sasikumar,K.R.Ramkumar Study of mechanical and machining behavior of AA 7075-3%TiB2 in-situ composites International Conference on Innovation in Engineering and Technology (ICIET’ 14) ,Vol.-- ,Issue--,ppt -- 2014 0 Applied Fund(No) 105 M.Gowthaman,S.Iniyan,K.R.Ramkuimar Study of mechanical behiaviour of Al 7075-x% TiB2-1% Gr hybrid in-situ composite International Conference on Advanced Design and Manufacturing-2014 ,Vol.-- ,Issue--,ppt -- 2014 0 Applied Fund(No) 106 S.Karthickeyan,S.Siddarda,A.R.Danavignesh Performance testing of diesel engine with modified piston bowl and varied injection pressures International Conference on Advanced Design and Manufacturing-2014 ,Vol.-- ,Issue--,ppt -- 2014 0 Applied Fund(No) 107 S.Sivasankaran,E.Saminathan,S.Sidharth Effect of Graphite addition on surface roughness during turning of AA 7075-ZrB2 in-situ metal matrix composites International Conference on Advances in Manufacturing and Materials Engineering (AMME 2014) ,Vol.-- ,Issue--,ppt -- 2014 0 Applied Fund(Others) 108 S.Karthickeyan,S.Siddarda,A.R.Danavignesh Performance testing of diesel engine with ceramic coated combustion chamber part and varied injection pressure National Conference on Recent Trends in Mechanical Engineering ,Vol.-- ,Issue--,ppt -- 2014 0 Applied Fund(No) 109 V.Sriram,A.Muthukumar,S.Balumahendran Synthesis, characterization and mechanical behaviour of AA 6063-x wt. % TiB2 (0, 2, 4 and 6 wt. %) in-situ composites International Conference on Advanced Manufacturing and Automation INCAMA-2013 ,Vol.-- ,Issue--,ppt -- 2013 0 Applied Fund(Others) 110 K.R.Ramkumar,S.Sasikumar,S.Karthikeyan Investigation on mapping behavior of cutting force with cutting parameters of AA 6063 Al alloy in turning International Conference on Advances in Energy Engineering (ICAEE-2013) ,Vol.-- ,Issue--,ppt -- 2013 0 Applied Fund(Others) 111 S.Sivasankaran,S.Nakul Sreedhar,S.Dineshkumar Die design for homogeneous plastic deformation during ECAP and investigation of mechanical properties of pure aluminium and copper rods International Conference on Computational intelligence & Advanced Manufacturing research ,Vol.-- ,Issue--,ppt -- 2013 0 Applied Fund(No) 112 S.Sivasankaran,A.Govindaraj,S.Muthukumar Mechanical behavious of friction stir processed AA6061 with Al2O3-Gr nanocomposites National Conference on frontiers in Mechanical Sciences and Automation Technology ,Vol.-- ,Issue--,ppt -- 2013 0 Applied Fund(No) 113 S.Sivasankaran,E.Baskaran,S.Pranesh Some investigation on mechanical properties of Al 6063 alloy during multiaxial forging National Conference on “Advances and Challenges in Mechanical Engineering – ACME 2013 ,Vol.-- ,Issue--,ppt -- 2013 0 Applied Fund(No) 114 S.Sivasankaran,E.Baskaran,S.Pranesh Warm multiaxial forging of Aluminium (6063) alloy National Conference on “Recent trends in mechanical engineering-RTME 2013” ,Vol.-- ,Issue--,ppt -- 2013 0 Applied Fund(No) 115 S.Sivasankaran,S.Dinesh,V.Sriram Investigation of cutting forces of AA 6063 and AA 6063-6% ZrB2 National conference on Recent advances in Design, Applications and Manufacturing Systems (RADAMS-13) ,Vol.-- ,Issue--,ppt -- 2013 0 Applied Fund(No) 116 V.Sriram,S.Dineshkumar ,S.Sivasankaran Severe Plastic Deformation: An Overview Advanced materials and Processing Technologies -2012 ,Vol.-- ,Issue--,ppt -- 2012 0 Applied Fund(No) 117 S.Sivasankaran,K. Sivaprasad,R. Narayanasamy Microstructure, cold workability and strain hardening behavior of trimodaled AA 6061 – TiO2 nanocomposite prepared by mechanical alloying Materials Science and Engineering A (Elsevier) ,Vol.528 ,Issue22,ppt 6776-6787 2011 3.8 Applied Fund(Others) 118 S.Sivasankaran,K. Sivaprasad,R. Narayanasamy X-ray peak broadening analysis of AA 6061100-x-x wt. % Al2O3 nanocomposite prepared by mechanical alloying Materials Characterization (Elsevier) ,Vol.62 ,Issue7,ppt 661-672 2011 0 Applied Fund(Others) 119 S.Sivasankaran,K. Sivaprasad,R. Narayanasamy Evaluation of compaction equations and prediction using adaptive neuro-fuzzy inference system on compressibility behavior of AA 6061100 ? x–x wt.% TiO2 nanocomposites prepared by mechanical alloying Powder Technology (Elsevier) ,Vol.209 ,Issue1,ppt 124-137 2011 2.825 Applied Fund(Others) 120 S.Sivasankaran,K. Sivaprasad,R. Narayanasamy Effect of strengthening mechanisms on cold workability and instantaneous strain hardening behavior during grain refinement of AA 6061-10 wt.% TiO2 composite prepared by mechanical alloying Journal of Alloys and Compounds (Elsevier) ,Vol.507 ,Issue1,ppt 236–244 2010 3.014 Applied Fund(Others) 121 S.Sivasankaran,K. Sivaprasad,R. Narayanasamy An investigation on flowability and compressibility of AA 6061100 ? x-x wt.% TiO2 micro and nanocomposite powder prepared by blending and mechanical alloying Powder Technology (Elsevier) ,Vol.201 ,Issue1,ppt 70-82 2010 2.825 Applied Fund(Others) 122 S.Sivasankaran,K. Sivaprasad,R. Narayanasamy Synthesis, structure and sinterability of 6061 AA100?x–x wt.% TiO2 composites prepared by high-energy ball milling Journal of Alloys and Compounds ,Vol.491 ,Issue1,ppt 712-721 2010 3.014 Applied Fund(Others) 123 G. Naveen Kumar,R.Narayanasamy,S. Natarajan Dry sliding wear behaviour of AA 6351-ZrB2 in situ composite at room temperature Materials & Design (Elsevier) ,Vol.31 ,Issue3,ppt 1526-1532 2010 4.023 Applied Fund(Others) 124 S.Sivasankaran,K. Sivaprasad,R. Narayanasamy Synthesis and characterization of mechanically alloyed AA 6061 reinforced with 12 wt.% Al2O3 nanocrystalline powders International Conference on Powder Metallurgy 2010 (PM10) ,Vol.-- ,Issue--,ppt -- 2010 0 Applied Fund(Others) 125 S.Sivasankaran,K. Sivaprasad,R. Narayanasamy Effect of grain refinement on workability of Al 6061 alloy reinforced with 10 wt.% TiO2 composite International Conference on Powder Metallurgy 2010 (PM10) ,Vol.-- ,Issue--,ppt -- 2010 0 Applied Fund(Others) 126 S.Sivasankaran,K. Sivaprasad,R. Narayanasamy Isotropic and anisotropic X-ray peak broadening models of AA 6061-12 wt. % TiO2 nanocomposite International Conference on Powder Metallurgy 2010 (PM10) ,Vol.-- ,Issue--,ppt -- 2010 0 Applied Fund(Others) 127 R.Narayanasamy,K. Sivaprasad,V.Anandakrishnan Mechanical Alloying of Aluminium based-metal matrix composites: A Review 2nd International conference on Recent Advances in Material Processing Technology (RAMPT 2009) ,Vol.-- ,Issue--,ppt -- 2009 0 Applied Fund(Others) 128 R.Narayanasamy,V. Anandakrishnan,S.Sivasankaran Influence of carbon content on workability behavior of powder metallurgy steels International Conference on Powder Metallurgy 2009 (PM09) ,Vol.-- ,Issue--,ppt -- 2009 0 Applied Fund(Others) 129 S.Sivasankaran,R.Narayanasamy,R. Jeyapaul Modelling of wrinkling in deep drawing of different grades of annealed commercially pure aluminium sheets when drawn through a conical die using artificial neural network Materials & Design (Elsevier) ,Vol.30 ,Issue8,ppt 3193-3205 2009 4.023 Applied Fund(No) 130 R.Narayanasamy,V. Anandakrishnan,S. Sivasankaran Influence of carbon content on workability behavior of powder metallurgy steels Transactions of PMAI ,Vol.35 ,Issue--,ppt 26-31 2009 0 Applied Fund(No) 131 S.Sivasankaran,R.Narayanasamy,T. Ramesh Analysis of workability behavior of Al–SiC P/M composites using backpropagation neural network model and statistical technique Computational Materials Science (Elsevier) ,Vol.47 ,Issue1,ppt 46-59 2009 2.182 Applied Fund(Others) 132 S.Sivasankaran,K.Pannerselvam,A.Noorulhaq Study on milling of glass fiber reinforced plastics (GFRP) composite National Conference of Emerging Materials and Technologies for India 2020 (EMT-INDIA 2020) ,Vol.-- ,Issue--,ppt -- 2008 0 Applied Fund(No) 133 S.Sivasankaran,K.Pannerselvam,A.Noorulhaq Study on milling of glass fiber reinforced plastic (GFRP) composite International Conference on Advances in Manufacturing Technology (ICAMT 2008) for Young Engineers ,Vol.-- ,Issue--,ppt -- 2008 0 Applied Fund(Others) 134 S.Sivasankaran,K.Pannerselvam,A.Noorulhaq Investigation On End Milling Of Glass Fiber Reinforced Plastics (Gfrp) Composites Proceeding of All India seminar on “Automation Trends in Manufacturing Industries: Cutting Edge Technologies & their Impact ,Vol.-- ,Issue--,ppt 29-36 2008 0 Applied Fund(No) 135 S.Sivasankaran,K.Pannerselvam,A.Noorulhaq Study of Milling of GFRP composite using statistical analysis (ANOVA) National Conference of Emerging Trends in Mechanical Engineering and Sciences (ETIMES-2007) ,Vol.-- ,Issue--,ppt 177-181 2007 0 Applied Fund(No)

Thesis Supervision Nr. Degree Title Place Country Registraion Year Award Year 1 M.Sc EXPERIMENTAL INVESTIGATION ON MECHANICAL, TRIBOLOGICAL AND MACHINING BEHAVIOR OF Cu-Zn-Al2O3 NANOCOMPOSITE PREPARED BY MECHANICAL ALLOYING AND HOT-PRESSING AMRITA SCHOOL OF ENGINEERING, COIMBATORE AMRITA VISHWA VIDYAPEETHAM COIMBATORE-641 112 India 2014 2016 2 M.Sc Mechanical Behavior of 3D Printed Fiberglass Reinforced Plastic Composites Department of Mechanial Engineering, College of Engineering, Qassim University Saudi Arabia 2020 2022 3 M.Sc Microstructure and Mechanical Properties of Four Novel High Entropy Alloys (HEA) Prepared by Mechanical Alloying Department of Mechanical Engineering, College of Engineering, Qassim University Saudi Arabia 2019 2022