Curriculum Vitae
Personal Data
Full NameHany Rizk Abdullatif Ammar
DegreeAssoc.Prof.Dr
DepartmentMechanical
College Mailhanyammar@qec.edu.sa
Personal Mail
NationalityEgypt
Office Ext.5314
Office-NumberB1-G116
MajorMechanical
MinorAdvanced Materials Technologies
Interest FieldNew Materials Metal matrix nanocomposites Nanomaterials
 
Academic Degrees
Nr.DegreeMajorInstituteCountryYear
1 Ph.D Metallurgical and Materials Engineering University of Quebec Canada 2010
2 M.Sc Metallurgical and Materials Engineering University of Quebec Canada 2006
3 B.Sc Metallurgical and Materials Engineering Suez Canal University Egypt 2001
 
Academic Experiences
Nr.TitleFT/PTPlaceCountryStart YearFinish Year
1 Staff Member FT Qassim University Saudi Arabia 2016 to date
2 Staff Member PT British University in Egypt Egypt 2014 2016
3 Staff Member FT Suez University Egypt 2012 2016
4 Staff Member FT King Saud University Saudi Arabia 2011 2013
5 Teaching Assistant FT Laval University Canada 2010 2011
6 Teaching Assistant FT University of Quebec Canada 2004 2010
7 Teaching Assistant FT Suez University Egypt 2001 2004
 
Administrative Work
Nr.Job NamePlaceFT/PTCountryStart YearFinish Year
1 Coordinator of Mechanical Engineering Department Mechanical Engineering Department, College of Engineering, Qassim University PT Saudi Arabia 2018 to date
2 Supervisor to the students committee of ME department QEC, Qassim University, Saudi Arabia PT Saudi Arabia 2016 to date
3 Council Coordinator of the Metallurgical & Materials Engineering Department, Suez University Suez University FT Egypt 2013 2016
 
 
Teaching Courses
Nr.Course TitleUndergraduate/ Postgraduate
1 Advanced Corrosion Control Postgraduate
2 Advanced Engineering Ceramics Postgraduate
3 Advanced Physical Metallurgy Postgraduate
4 Corrosion and Corrosion Control Undergraduate
5 Destructive Testing of Materials Undergraduate
6 Failure Analysis Undergraduate
7 Introduction to Engineering Design - I Undergraduate
8 Introduction to Engineering Design - II Undergraduate
9 Materials Engineering Undergraduate
10 Materials Engineering Lab Undergraduate
11 Materials Science and Engineering Undergraduate
12 Modern Engineering Materials Undergraduate
13 Non-destructive Testing Undergraduate
14 Powder Metallurgy Undergraduate
15 Safety in Oil and Gas Industry Undergraduate
 
 
Training Courses
Nr.TypeCategoryCourse TitlePlaceCountryStart Finish Hours
1 Trainee_Outside_QEC Educational EDAX EBSD Training Course AMETEK, Tilburg Netherlands 9/11/2015 11/11/2015 24
2 Trainee_Outside_QEC Technical Research Connect British Council Egypt 3/2/2015 5/2/2015 18
3 QEC_Trainee Educational Blackboard Learning Management System - Level I Qassim University Saudi Arabia 28-2-2017 1-3-2017 8
4 Trainee_Outside_QEC General Organizing Scientific Conferences Cairo University Egypt 2011 2011 12
5 Trainee_Outside_QEC Educational Effective Teaching Suez Canal University Egypt 2010 2010 12
6 Trainee_Outside_QEC Educational Micro Teaching Suez Canal University Egypt 2010 2010 12
7 Trainee_Outside_QEC Educational Use of Technology in Teaching Suez Canal University Egypt 2010 2010 12
8 Trainee_Outside_QEC Educational Modern Trends in Teaching Suez Canal University Egypt 2010 2010 12
9 Trainee_Outside_QEC Educational Methods of Scientific Research Suez Canal University Egypt 2010 2010 12
10 QEC_Trainee Educational Blackboard Learning Management System - Level II Qassim University Saudi Arabia 18-4-2017 19-4-2017 8
11 Trainee_Outside_QEC Educational International Publishing of Scientific Research Cairo University Egypt 18/7/2016 19/7/2016 12
12 Trainee_Outside_QEC Educational The Credit Hours System Cairo University Egypt 18/7/2016 19/7/2016 12
13 Trainee_Outside_QEC General University Code of Ethics Cairo University Egypt 17/8/2016 18/8/2016 12
14 Trainee_Outside_QEC General Change Management Cairo University Egypt 17/8/2016 18/8/2016 12
15 Trainee_Outside_QEC Educational EDAX TEAM EDS Training Course AMETEK, Tilburg Netherlands 12/11/2015 13/11/2015 24
16 QEC_Trainee Technical Continuous Improvement "Kaizen" Buraidah - Qassim Saudi Arabia 10-3-2019 14-3-2019 45
 
 
Member in Professional Organization
Nr.TitlePlaceCountryDate
1 Egyptian Engineering Syndicate Cairo Egypt 2002
 
Honors / Awards
Nr.TitlePlaceCountryDate
1 The Best Paper Award American Foundry Society, USA United States 2011
2 Postdoctoral Fellowship Laval University in collaboration with ALCOA Canada 2010
3 The CQRDA Award le Centre québécois de recherche et de développement de l’aluminium (CQRDA) Canada 2009
4 The ALCOA Award ALCOA (The Aluminum Company of America) Canada 2008
5 Three Years Scholarship NSERC-ALCOA-UQAC Industrial Research Chair in Advanced Technology of Light Metals for Automotive Applications Canada 2006
6 Two Years Scholarship NSERC-GMC-UQAC Industrial Research Chair in Advanced Technology of Light Metals for Automotive Applications. Canada 2004
 
Conferences
Nr.ParticipationConference NameTitlePlaceCountryFundYear
1 Conference The 119th Metalcasting Congress On the Impact Toughness of Al-B4C MMC: The Role of Minor Additives and Heat Treatment Columbus, OH United States Others 2015
2 Conference The ICMSE 2015: International Conference on Materials Science and Engineering Thermally Stable Nanocrystalline Aluminum Alloys Processed by Mechanical Alloying and High Frequency Induction Heat Sintering Paris France Others 2015
3 Conference TechConnect World Innovation Conference Manufacturing of thermally stable nanocrystalline aluminum alloys and studying their corrosion behavior in Arabian Gulf seawater Washington United States Others 2015
4 Conference International Conference on Materials and Engineering Technology (ICMET 2014) Effect of Consolidation and Sintering Parameters on the Mechanical Responses of Nanocrystalline Al-Fe Alloy Processed by Mechanical Alloying Chicago United States Others 2014
5 Conference The 118th Metalcasting Congress On the Mechanical Properties and Fracture Behavior of Zr and Ti- Containing Al-15vol% B4C Based Metal Matrix Composites Schaumburg, IL United States Others 2014
6 Conference THERMEC Al-15 vol.% B4C based metal matrix composites: Production, microstructure and mechanical characteristics Las Vegas United States Others 2013
7 Conference The 117th Metalcasting Congress A New Technology for the Production of Al-B4C Metal Matrix Composites St. Louis United States Others 2013
8 Conference Conference of Metallurgist, COM Effects of the Melt Thermal Treatment Process on the Tensile Properties of 356 Type-Alloys Montreal Canada Others 2011
9 Conference 140th TMS Annual Meeting Effects of Physical Properties of Anode Raw Materials on the Paste Compaction Behavior San Diego, CA United States Others 2011
 
Publications
Nr.AuthorsPublication TitlePlace & DateJournal RankingImpact FactorStatus
1 HR Ammar,EM Sherif,S.Sivasankaran Developing Improved Corrosion-Resistant AA5083—BN/WC Composites for Tribological Applications Materials ,Vol.16 ,Issue4,ppt 1663 2023 Q1 3.748 Applied
Fund(QU)
2 S Sivasankaran,EM Sherif,HR Ammar Influence of Oxide Dispersions (Al2O3, TiO2, and Y2O3) in CrFeCuMnNi High-Entropy Alloy on Microstructural Changes and Corrosion Resistance Crystal ,Vol.13 ,Issue4,ppt 605 2023 Q2 2.67 Applied
Fund(QU)
3 HR Ammar,S Sivasankaran,ESM Sherif Synthesis, Microstructure Investigation, Mechanical and Tribological Behaviour of the AA5083–WC Composite Materials ,Vol.16 ,Issue7,ppt 2891 2023 Q1 3.748 Applied
Fund(QU)
4 S Sivasankaran,HR Ammar,ESM Sherif Effect of Al2O3 (x = 0, 1, 2, and 3 vol.%) in CrFeCuMnNi-x High-Entropy Alloy Matrix Composites on Their Microstructure and Mechanical and Wear Performance Materials ,Vol.16 ,Issue10,ppt 3672 2023 Q1 3.748 Applied
Fund(QU)
5 B AlMangour,S Sivasankaran, HR Ammar Synthesis, Microstructures, Mechanical, and Corrosion Behavior of FeMn(35?x)–x (Cu, W, and Co)-Based Biodegradable Alloys Prepared by Mechanical Alloying Metallurgical and Materials Transactions A ,Vol.54 ,Issue-,ppt 3767–3780 2023 Q1 2.8 Applied
Fund(QU)
6 S Sivasankaran,OM Irfan,KR Ramkumar Manufacturing of (Al–10Zn)/TiB2 in-situ nanocomposites by reactive liquid metallurgy and hot-extrusion for enhanced interfacial bonding and mechanical properties Materials Science and Engineering: A ,Vol.859 ,Issue-,ppt 144200 2022 Q1 6.044 Applied
Fund(No)
7 S Sivasankaran,HR Ammar,B Almangour Influence of Milling Time and Ball-to-Powder Ratio on Mechanical Behavior of FeMn30Cu5 Biodegradable Alloys Prepared by Mechanical Alloying and Hot-Forging Crystals ,Vol.12 ,Issue12,ppt 1777,2 2022 Q2 2.67 Applied
Fund(QU)
8 AM Samuel,HR Ammar,Y Zedan Effect of Ca–Sr–Mg and Bi–Sr–Mg Interactions on the Microstructural Characterization and Tensile Properties of B319 Alloy International Journal of Metalcasting ,Vol.- ,Issue-,ppt 1-20 2022 Q2 1.8 Applied
Fund(No)
9 S Sivasankaran,Hany R Ammar,Fahad A Al-Mufadi Continuous hot-compaction behavior of nanostructured FeCrCuMnTi-(V, Zn) high-entropy alloys Materials and Manufacturing Processes ,Vol.- ,Issue-,ppt 1-10 2021 Q2 4.6 Applied
Fund(QU)
10 HR Ammar,AM Samuel,FH Samuel Appropriate Heat Treatment Procedures for Improving Strength and Quality Index in 354 Casting Alloys International Journal of Metalcasting ,Vol.- ,Issue-,ppt 1-18 2021 Q2 1.8 Applied
Fund(No)
11 Subbarayan Sivasankaran,Fahad A Al-Mufadi, Hany R Ammar Influence of V and Zn in FeCrCuMnTi High-Entropy Alloys on Microstructures and Uniaxial Compaction Behavior Prepared by Mechanical Alloying Crystals ,Vol.11 ,Issue11,ppt 1413 2021 Q2 2.4 Applied
Fund(QU)
12 Hany R Ammar,S Sivasankaran,Abdulaziz S Alaboodi Synthesis, phase evolutions, microstructures, and compaction behavior of four copper-chalcogenide micron-thermoelectric powders (Cu2ZnSnS4/Se4, Cu2MnSiS4/Se4, Cu2MnSnS4/Se4, and Cu2ZnSiS4/Se4) prepared by mechanical alloying Materials Chemistry and Physics ,Vol.271 ,Issue-,ppt 124943 2021 Q2 4.09 Applied
Fund(QU)
13 HR Ammar,AM Samuel,HW Doty Premium Strength and Optimum Quality in Al-Si-Mg/Al-Si-Mg-Cu Cast Alloys Using Two Different Types of Molds International Journal of Metalcasting ,Vol.- ,Issue-,ppt 1-16 2021 Q2 1.8 Applied
Fund(No)
14 HR Ammar,AM Samuel,HW Doty The Influence of Hot Isostatic Pressing on the Fatigue Life of Al–Si–Cu–Mg 354-T6 Casting Alloy International Journal of Metalcasting ,Vol.- ,Issue-,ppt 1-12 2021 Q2 1.8 Applied
Fund(No)
15 HR Ammar,AM Samuel,HW Doty Effect of iron, copper and heat treatments on the microstructure and tensile properties of Al-Si-based alloys International Journal of Metalcasting ,Vol.- ,Issue-,ppt 1-21 2021 Q2 1.8 Applied
Fund(No)
16 HR Ammar,AM Samuel,HW Doty Effect of iron, copper and heat treatments on the microstructure and tensile properties of Al-Si-based alloys International Journal of Metalcasting ,Vol.- ,Issue-,ppt 1-21 2021 Q2 1.8 Applied
Fund(No)
17 Hany R Ammar,S Sivasankaran,Abdulaziz S Alaboodi Investigation of the Microstructure and Compressibility of Biodegradable Fe-Mn-Cu/W/Co Nanostructured Alloy Powders Synthesized by Mechanical Alloying Materials ,Vol.14 ,Issue11,ppt 3088 2021 Q1 3.6 Applied
Fund(QU)
18 Hany R Ammar,S Sivasankaran,Abdulaziz S Alaboodi The influence of ball milling processing variables on the microstructure and compaction behavior of Fe–Mn–Cu alloys Materials Science-Poland ,Vol.39 ,Issue3,ppt 410-429 2021 Q3 1 Applied
Fund(QU)
19 HR Ammar,AM Samuel,HW Doty The Concept of Quality Index and Its Application for Al–Si Cast Alloys International Journal of Metalcasting ,Vol.- ,Issue-,ppt 1-16 2021 Q2 1.8 Applied
Fund(No)
20 Hany R.Ammar,S.Sivasankaran,Abdulaziz S.Alaboodi Synthesis, microstructural investigation and compaction behavior of Al0.3CrFeNiCo0.3Si0.4 nanocrystalline high entropy alloy Advanced Powder Technology ,Vol.32 ,Issue2,ppt 398-412 2021 Q1 4.21 Applied
Fund(No)
21 Hany Rizk AMMAR,Muneer BAIG,Asiful Hossain SEIKH Effect of alloying elements on thermal stability of nanocrystalline Al alloys Transactions of Nonferrous Metals Society of China ,Vol.31 ,Issue1,ppt 11-23 2021 Q1 2.615 Applied
Fund(No)
22 HR Ammar,AM Samuel,FH Samuel The Concept of Quality Index and Its Application for Al–Si Cast Alloys International Journal of Metalcasting ,Vol.00 ,Issue00,ppt 1-16 2021 Q1 1.347 Applied
Fund(No)
23 S.Sivasankaran,K.R.Ramkumar,Hany R.Ammar Microstructural evolutions and enhanced mechanical performance of novel Al-Zn die-casting alloys processed by squeezing and hot extrusion Journal of Materials Processing Technology ,Vol.292 ,Issue00,ppt 117063 2021 Q1 4.669 Applied
Fund(No)
24 S.Sivasankaran,K.R.Ramkumar,Hany R.Ammar Microstructural evolutions, hot deformation and work hardening behaviour of novel Al-Zn binary alloys processed by semi-solid squeezing and hot extrusion Metals and Materials International ,Vol.00 ,Issue00,ppt 00 2021 Q2 1.99 Applied
Fund(No)
25 Hany R. Ammar,, The Impact of Alloying Elements Addition on the Flow Behavior of Aluminum Alloys The International Conference on Recent Trends in Metallurgy, Materials Science and Manufacturing (IMME19), Organized by the Department of Metallurgical and Materials Engineering, National Institute of Technology Tiruchirappalli, India ,Vol.73 ,Issue6,ppt 1605-1609 2020 - 0 Applied
Fund(No)
26 Yaser A. Alshataif, S. Sivasankaran,Fahad A. Al-Mufadi Synthesis, Microstructures and Mechanical Behaviour of Cr0.21Fe0.20Al0.41Cu0.18 and Cr0.14Fe0.13Al0.26Cu0.11Si0.25Zn0.11 Nanocrystallite Entropy Alloys Prepared by Mechanical Alloying and Hot-Pressing Metals and Materials International volume 27, pages(2021) ,Vol.27 ,Issue0,ppt 139–155 2020 Q2 1.99 Applied
Fund(No)
27 YA Alshataif,S Sivasankaran,FA Al-Mufadi Synthesis, structure, and mechanical response of Cr0. 26Fe0. 24Al0. 5 and Cr0. 15Fe0. 14Al0. 30Cu0. 13Si0. 28 nanocrystallite entropy alloys Advanced Powder Technology ,Vol.31 ,Issue5,ppt 2161-2177 2020 Q1 4.21 Applied
Fund(No)
28 Hany R Ammar, S Sivasankaran,Abdulaziz S Alaboodi Synthesis and Microstructural Characterization of Cu2MnSnS4/Se4 Nano-Thermoelectric Material International Journal of Recent Technology and Engineering ,Vol.8 ,Issue6,ppt 3749-3755 2020 NotRanked 0 Applied
Fund(QU)
29 S Sivasankaran,Hany R Ammar,Abdulaziz S Alaboodi Mathematical Modeling (Buckingham's ? Theorem) and Optimization Technique on Mechanically Alloyed Nanocomposite Materials International Journal of Engineering and Advanced Technology ,Vol.9 ,Issue4,ppt 1915-1921 2020 NotRanked 0 Applied
Fund(QU)
30 Hany R Ammar,S Sivasankaran, Abdulaziz S Alaboodi Synthesis and Microstructural Characterization of Nanostructured High Entropy Alloy International Journal of Innovative Technology and Exploring Engineering ,Vol.9 ,Issue7,ppt 275-278 2020 NotRanked 0 Applied
Fund(QU)
31 HUSSEIN ZEIN,HANY R. AMMAR, S. SIVASANKARAN MULTISCALE MODELING AND SIMULATION OF 3D EFFECTIVE HOMOGENIZATION FOR MATERIAL PROPERTIES OF GRAPHENE NANO-PLATELETS REINFORCED IN AL7050 MATRIX COMPOSITE International Journal of Mechanical and Production Engineering Research and Development ,Vol.10 ,Issue3,ppt 13127-13143 2020 Q3 0 Applied
Fund(QU)
32 Bandar Abdullah Aloyaydi,Subbarayan Sivasankaran,Hany Rizk Ammar Influence of infill density on microstructure and flexural behavior of 3D printed PLA thermoplastic parts processed by fusion deposition modeling AIMS Materials Science ,Vol.6 ,Issue6,ppt 1033-1048 2019 0 Applied
Fund(No)
33 Hany R. Ammar,Fahmy Haggag, Nondestructive Evaluation of the Mechanical Properties of Nanostructured Al-Cu Alloy at Room and Elevated Temperatures Transactions of Nonferrous Metals Society of China ,Vol.00 ,Issue00,ppt 00 2019 2.338 Applied
Fund(No)
34 Yaser A. Alshataif, S. Sivasankaran, Fahad A. Al-Mufadi, Abdulaziz S. Alaboodi & Hany R. Ammar ,, Manufacturing methods, microstructural and mechanical properties evolutions of high-entropy alloys: A review Metals and Materials International ,Vol.26 ,Issue0,ppt 1099–1133 2019 Q2 1.99 Applied
Fund(No)
35 Muneer Baig,Hany R. Ammar,Asif H. Seikh Thermal Stability of Nanocrystalline Al-10Fe-5Cr Alloy: Synthesis and Characterization Transactions of Nonferrous Metals Society of China ,Vol.29 ,Issue2,ppt 242-252 2019 1.795 Applied
Fund(Others)
36 Lavinia Tonelli,A. Morri, S. Toschi,M. Shaaban Effect of FSP parameters and tool geometry on microstructure, hardness, and wear properties of AA7075 with and without reinforcing B4C ceramic particles The International Journal of Advanced Manufacturing Technology ,Vol.102 ,Issue9,ppt 3945-3961 2019 2.496 Applied
Fund(Others)
37 Hany R. Ammar,, Mechanical behavior of nanostructured bulk aluminum at various temperatures Materials Research Express ,Vol.6 ,Issue11,ppt 1-16 2019 1.449 Applied
Fund(No)
38 Hany R. Ammar,F.M. Haggag,A.S. Alaboody Nondestructive Measurements of Flow Properties of Nanocrystalline Al-Cu-Ti Alloy using Automated Ball Indentation (ABI) Technique Materials Sciences & Engineering: A ,Vol.729 ,Issue--,ppt 477-486 2018 3.24 Applied
Fund(No)
39 M.M.Z. Ahmed,Sabbah Ataya,M.M. El-Sayed Seleman Friction stir welding of similar and dissimilar AA7075 and AA5083 Journal of Materials Processing Technology ,Vol.242 ,Issue-,ppt 77-91 2017 2.3 Applied
Fund(Others)
40 Garza-Elizondo, G. H.,Samuel, A. M.,Samuel, F. H Effect of Alloying Elements on the Performance of 354 Type Alloys Transactions of the American Foundry Society and The proceedings of the 121st Annual Meeting ,Vol.125 ,Issue-,ppt 61-74 2017 0 Applied
Fund(No)
41 Muneer Baig,Hany Rizk Ammar,Asiful Hossain Seikh Effect of Immersion Time and Temperature on Corrosion Behaviour of Nanocrystalline Al-Fe-Cr Alloy International Journal of ELECTROCHEMICAL SCIENCE ,Vol.12 ,Issue--,ppt 3336 – 3349 2017 1.469 Applied
Fund(Others)
42 M. Baig,H.R. Ammar,A.H. Seikh Thermo-Mechanical Responses of Nanocrystalline Al-Fe Alloy Processed Using Mechanical Alloying and High Frequency Heat Induction Sintering Materials Science and Engineering A ,Vol.655 ,Issue-,ppt 132-141 2016 2.6 Applied
Fund(Others)
43 A.H. Seikh,M. Baig,H.R. Ammar The Influence of Transition Metals Addition on the Corrosion Resistance of Nanocrystalline Al Alloys Produced by Mechanical Alloying Journal of Metals ,Vol.6 ,Issue6,ppt 1-14 2016 1.57 Applied
Fund(Others)
44 H. Junaedi,M.F. Ibrahim,H.R. Ammar Effect of Testing Temperature on the Strength and Fracture Behavior of Al-B4C Composites Journal of Composite Materials ,Vol.-- ,Issue--,ppt -- 2015 1.242 Applied
Fund(Others)
45 M.F. Ibrahim,H.R. Ammar,S.A. Alkahtani Metallographic Investigation of Tensile and Impact Tested Aluminum Composites Journal of Composite Materials, ,Vol.-- ,Issue--,ppt -- 2015 1.242 Applied
Fund(Others)
46 M.F. Ibrahim, H.R. Ammar,A.M. Samuel On the Impact Toughness of Al-15 vol. % B4C Metal Matrix Composites Journal of Composites Part B: Engineering ,Vol.79 ,Issue--,ppt 83-94 2015 3.85 Applied
Fund(Others)
47 A. H. Seikh,M. Baig,H.R. Ammar Corrosion Behavior of Nanostructure Al-Fe Alloy Processed by Mechanical Alloying and High Frequency Induction Heat Sintering International Journal of Electrochemical Science ,Vol.10 ,Issue--,ppt 3054-3064 2015 1.69 Applied
Fund(Others)
48 E.M. Sherif,H.R. Ammar,K.A. Khalil A Comparative Study on the Electrochemical Corrosion Behavior of Microcrystalline and Nanocrystalline Aluminum in Natural Seawater International Journal of Electrochemical Science ,Vol.10 ,Issue--,ppt 775-785 2015 1.69 Applied
Fund(Others)
49 M.F. Ibrahim,H.R. Ammar,A.M. Samuel On the Impact Toughness of Al-B4C MMC: The Role of Minor Additives and Heat Treatment Transactions of the American Foundry Society ,Vol.123 ,Issue-,ppt 49-56 2015 0 Applied
Fund(Others)
50 Hany R. Ammar,Khalil A. Khalil,El-Sayed M. Sherif Thermally Stable Nanocrystalline Aluminum Alloys Processed by Mechanical Alloying and High Frequency Induction Heat Sintering International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering ,Vol.9 ,Issue1,ppt 154-164 2015 0 Applied
Fund(Others)
51 M. Baig,H. R. Ammar,A. H. Seikh Effect of Consolidation and Sintering Parameters on the Mechanical Responses of Nanocrystalline Al-Fe Alloy Processed by Mechanical Alloying,” Applied Mechanics and Materials Applied Mechanics and Materials ,Vol.719 ,Issue--,ppt 87-90 2015 0 Applied
Fund(Others)
52 M.F. Ibrahim,A.M. Samuel,H.R. Ammar On the Mechanical Properties and Fracture Behavior of Zr and Ti-Containing Al-15vol% B4C Based Metal Matrix Composites TRANSACTIONS OF THE AMERICAN FOUNDRY SOCIETY ,Vol.122 ,Issue--,ppt 83-93 2014 0 Applied
Fund(Others)
53 E.M. Sherif,H.R. Ammar,K.A. Khalil Effects of copper and titanium on the corrosion behavior of newly fabricated nanocrystalline aluminum in natural seawater Applied Surface Science ,Vol.301 ,Issue--,ppt 142-148 2014 3.15 Applied
Fund(Others)
54 M.F. Ibrahim,H.R. Ammar,A.M. Samuel Mechanical Properties and Fracture of Al-15vol% B4C Based Metal Matrix International Journal of Cast Metals Research ,Vol.27 ,Issue1,ppt 7-14 2014 0.55 Applied
Fund(Others)
55 M.F. Ibrahim,H.R. Ammar,A.M. Samuel Metallurgical Parameters Controlling Matrix/B4C Particulates Interaction in Aluminum-Boron Carbide Metal Matrix Composites International Journal of Cast Metals Research ,Vol.26 ,Issue6,ppt 365-373 2013 0.55 Applied
Fund(Others)
56 M.F. Ibrahim,H. R. Ammar,A.M. Samuel A New Technology for the Production of Al-B4C Metal Matrix Composites TRANSACTIONS OF THE AMERICAN FOUNDRY SOCIETY ,Vol.121 ,Issue--,ppt 99-110 2013 0 Applied
Fund(Others)
 
Thesis Supervision
Nr.DegreeTitlePlaceCountryRegistraion YearAward Year
1 M.Sc Synthesis and Characterization of Al-TiC Nano-Composite Using Mechanical Alloying Suez University Egypt 2015 2017
2 M.Sc Effect of Tin Content and Heat Treatments on the Efficiency of Galvalum III Commercial Aluminium Anode Suez University Egypt 2016 2018
3 M.Sc Influence of Indium and Zinc Addition on the Aluminum Sacrificial Anode Efficiency Suez University Egypt 2016 2018
4 M.Sc Production and Characterization of AA7075-B4C Metal Matrix Composites Using Friction Stir Processing Suez University Egypt 2015 2017